Need of Stone Care and Restoration

There are two general types of Natural stone that are available in the market on the basis of their composition – siliceous stone and calcareous stone. The chemical composition of both types of stones differs widely.

Siliceous stones like granite, sandstone, slate, brownstone, etc. are mainly composed of silica particles. They are more durable and are comparatively easier to clean and maintain. On the other hand, calcareous stones like limestone, marble, travertine, etc. are composed of calcium carbonate.

Over the period of time, with daily wear and tear, dust and inefficient or improper cleaning, depreciation in the quality of the stone, loss of shine, etching, stains, yellowing of surface, cracks, and chips are some of the most common issues that can be seen but should not be overlooked. One may ask, is it possible to keep the stone’s shine forever? The answer is undoubtedly, yes.

For a long-lasting alluring appearance of the natural stone and to keep the look that it gives to your home or office, proper stone care is a must. The cleaning process might differ for different types of stones used which makes it really crucial to have appropriate knowledge about the different types of stones and the cleaning process to be followed for each type.

With professional stone care and restoration services, stones can be restored back to their natural look and can be maintained that way always. Not only the quality of the stone is maintained but with proper cleaning and restoration if there are any cracks in the stone if the tiles are not even if there is any stain which persists from years, if the spilling of some substance has caused etching or anything at all, everything can be restored back to which removes the need of replacing the stone. This makes the entire process cost-effective too in the long run.

Some tips that will help you in stone care and restoration

1. Identify before removing –

Before getting on to cleaning stains, identify the type of stain as due to the different chemical composition of products, the cleaning procedure suitable for one kind of stain might be poisonous to another kind of stain. Identify if it’s an oil-based stain, organic stain, biological stain, ink stain, paint stain, inorganic metal stain, water spots, etch marks, or any other stain, and then choose the cleaning procedure accordingly.

2. Use the right cleaning product –

If the label of the cleaning product that you are using does not specify that it can be utilized safely on stone then strictly avoid it. Therefore, it is always advised to conduct thorough research before selecting any cleaning material so that your investment pays long term dividends.

3. Contact professional services –

Unless you are extremely sure of the cleaning process, contact professional stone care and restoration services so that they can guide you in the best way, and in cases required, you can always ask them to get the job done.

Be sure to seek assistance from professionals to avail more information about this topic.